How To Repair Windows 7 Usb Drivers

The following fault may occurred while trying to install Windows Bone from a USB installation disk: "Select the driver to be installed. Load Commuter. A required CD/DVD drive device is missing. II f you take a driver floppy disk, CD, DVD, or USB flash bulldoze, please insert it now. Notation: If the Windows installation media is in the CD/DVD drive, you lot can safely remove it for this step".

Select the driver to be installed

The "Select the commuter to installed" setup mistake message, is occurred during Windows 7 installation through a USB flash drive, past using a USB 3.0 port. This problem is caused because the Windows installer media doesn't have a USB 3.0 commuter to install Windows through the USB 3.0 port.

How to featherbed the "Select the commuter to exist installed" error when yous endeavor to install Windows from USB.

In society to resolve the "Select the driver to be installed" USB Windows installation error:

Method 1. Remove and Reinsert the USB media.

1. When the "Select the commuter to be installed" error, appears click Cancel. (This volition bring you dorsum to the first setup screen)
ii. Remove and re-insert the USB installation media.
three. Now try to install Windows.

Method 2. install Windows from USB two.0 Port or from DVD.

1. Shut downward the computer.

2. Plug your USB flash drive that contains the Windows setup files to a USB 2.0 port on the computer and start the installation again. *

* Annotation: If your estimator doesn't have a USB 2.0 port then disable the USB 3.0 support in BIOS settings (if supported), or install Windows from a DVD media.

Method 3. Add USB 3.0 drivers to your Windows USB Media past using Gigabyte'south Windows USB Installation Tool.

The 2d method to resolve the "Select the driver to be installed" mistake, is to add together USB 3.0 support (drivers) to your Windows 7 installation media.*

* Annotation: The procedure requires to accept admission to some other working calculator with Windows 8.1 or Windows ten Bone. Use this method if your estimator doesn't have USB 2.0 ports or if you cannot install Windows past using a Windows DVD media.

Step 1. Create a Windows USB Installation Media.

Create a Windows USB installation media past using Microsoft's USB Creator Tool or by using the Rufus Creator utility.

Related Articles.

How to create a Windows 10 USB installation media using Media Creation Tool.
How to Create Windows x USB Installation Using RUFUS Creator Utility.

Step 2. Download the Windows USB Installation Tool.

ane. Navigate to Gigabyte's Support Site.
2. At the search box type "Windows USB Installation Tool" (without quotes).

iii. Download the corresponding 'Windows USB Installation Tool' co-ordinate to your motherboard series.
4. Unzip the downloaded file and then continue to next step.

Step 3. Add USB 3.0/3.i Commuter Support to Windows 7 USB.

1. Plug the Windows USB Installation Media on the figurer.
2. From the extracted folder, double click to run the "WindowsImageTool.exe" application.
3. Now perform the following:

1. Select None-Add together USB drivers in Source Path.
2. Cull the Windows 7 USB installation disk in the Destination Path.
3. Finally click Start.
4. When the procedure is completed click Shut.

4. Eject the USB drive and employ it to install Windows.

Method 4. Add USB 3.0 Back up to Windows 7 by using Intel's Windows 7* USB iii.0 Creator Utility. *

* Annotation: This method is no longer working because Intel has removed the 'USB Creator utility' from its website.

1. Download ~~Intel's Windows 7* USB 3.0 Creator Utility~~ .
2. Extract the "Win7-USB3.0-Creator-V3.nothing" file.
three. Plug the USB flash drive that contains the Windows installation files on the figurer.
iv. From the extracted "Win7-USB3.0-Creator-V3" folder, right-click at the "Installer_Creator.exe" and select Run equally administrator.

Windows 7 USB 3.0 Creator Utility

5. Click Scan {…} and select the USB bulldoze letter (that contains the Windows installation files).

USB 3.0 Creator Utility

vi. Finally press the Create Image push and wait until the process is completed.

Intel USB 3.0 Creator Utility

7. Unplug the USB disk and use it to install Windows.

That's all folks! Did it work for you?

Please leave a comment in the comment section below or fifty-fifty better: like and share this weblog post in the social networks to help spread the word well-nigh this.

If this commodity was useful for you, please consider supporting united states of america by making a donation. Even $1 can a make a huge departure for us.